Mackie C300z 12" Portable Passive Speaker Loudspeaker

Portable Precision Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer

Passive version of the best-selling SRM450

One speaker included per purchase

Features:

• HF compression driver mounted on a multi-celled aperture, with a constant directivity horn for room-wide 90 x 45 dispersion
• Precise reproduction of critical upper mid-range and high frequencies
• Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
• Designed for optimum performance with Mackie powered mixers and power amplifiers
• 750W peak power handling
• Three setup configurations: pole mount, flyable and wedge

• Frequency Response -3 dB)
  • 55 Hz -18 kHz
• Frequency Range -10 dB)
  • 45 Hz -20 kHz
• Maximum SPL Long-term @ 1m 123 dB
• Low-Frequency Crossover Type
  • 24 dB/oc tave, time offset corrected
• High-Frequency Crossover Type
  • 24 dB/octave
• Crossover Frequency
  • 1800 Hz

• Input Type: Speakon -style NL4 jack, 1/4-inch TS phone jack
• Input Impedance
• 8 ohms
• Power Handling
  • rms: 300 watts
  • music: 500 watts
  • peak: 750 watts
• Operating Temperature Range
  • -10 C to 45 C
  • (14 F to 113 F)

• Low-Frequency Transducer
  • Diameter: 12 in/300 mm
  • Voice Coil Diameter: 3.0 in/75 mm
  • Sensitivity (1W@1m): 98 dB
  • Nominal Impedance: 8 ohms
  • Power Handling: 300 watts
  • Frequency Range: 50 Hz -3000 Hz
• High-Frequency Driver and Horn
  • Diaphragm Diameter: 1.75 in/44.5 mm
  • Exit Throat Diameter: 1 in/24.5 mm
  • Diaphragm Material: Titanium
  • Sensitivity (1W@1m): 106 dB
  • Nominal Impedance: 8 ohms
  • Power Handling: 150 watts
  • Frequency Range: 1000 Hz -20000 Hz
  • Horn Type
    • Composite: Ex po nen tial and Conical
  • Mouth Size
    • 12 in/305 mm W x 7 in/178 mm H
  • Horizontal Coverage
    • 90 10 (1 kHz -20 kHz)
  • Vertical Coverage
    • 45 10 (2.8 kHz -20 kHz)

• Over-Excursion Protection
  • Second-Or der High-Pass Filter
• Driver Protection
  • Dynamic protection for compression driver

• Basic Design
  • Asymmetrical Trapezoidal
• Enclosure Alignment
  • Sixth-Order
• Material
  • Polypropylene
• Finish
  • Grey, textured finish
• Handles
  • One on each side, one on top
• Mounting Methods
  • Integrated mounting points, M10 Two located on each side, top, bottom, and rear of enclosure
• Grille
  • Perforated metal with weatherresistant coating

• Height 26 in/660 mm
• Width 15.4 in/390 mm
• Depth 14.8 in/376 mm
• Weight 43 lbs/19.5 kg

• PA-A1 forged shoulder eyebolt hardware
  • (M10 x 1.5 mm x 20 mm)

Quick Start Guide